DMOM2508CL 320×240 ToF depth camera with MIPI CSI-2 interface and flexible ribbon cable

Depth Resolution 320 × 240

Measurement Range 0.2-2 m

Frame Rate 10-30 fps

DMOM2508CL 320 × 240 MIPI CSI-2 ToF Depth Camera Module

A compact 940 nm ToF camera module for near-field depth sensing in AR/VR, gesture, robotics and people-analysis systems.

Key Highlights

940 nm, 3 W active illumination
21.00 × 9.50 × 6.33 mm compact module head

Request a Quote

Engineering support

Overview

DMOM2508CL is a compact 320 × 240 Time-of-Flight depth camera module for embedded spatial sensing. It combines a global-shutter sensor, 940 nm active illumination and a 2-lane MIPI CSI-2 interface for applications that need near-field depth data rather than RGB imagery alone.

The published specification lists a 0.2-2 m measurement range, 10-30 fps operation, 71.8° horizontal × 56.6° vertical field of view and a 21.00 × 9.50 × 6.33 mm module head. These parameters make the module a practical starting point for space-constrained AR/VR, gesture, robotics and people-analysis designs.

The stated depth accuracy is ≤1% or ≤1 cm, with distortion below 2.5%. The source does not publish the distance, target reflectivity, ambient illumination or temperature used for these figures. Validate depth performance after integrating the final optical window, enclosure and host platform.

Depth Resolution: 320 × 240
Measurement Range: 0.2-2 m
Frame Rate: 10-30 fps
Data Interface: MIPI CSI-2, 2 lanes

Applications

DMOM2508CL is intended for compact products that use depth maps for interaction, measurement or scene awareness.

AR/VR and gesture interaction

Hand and finger tracking for gesture control
Interaction with virtual objects and spatial user interfaces

Face and motion sensing

Face recognition and face-motion tracking
Localization and movement analysis for people or animals

Robotics and close-range vision

Depth input for robot-gripper visual support
Object detection and positioning inside the 0.2-2 m measurement zone

3D capture and occupancy analytics

3D reconstruction and spatial capture
People counting and motion analysis

Technical Specifications

Depth imaging and optics

Parameter	Published specification
Sensor type	Global shutter
Depth resolution	320 × 240
Pixel size	15 µm
Sensor size	1/3 inch
Measurement range	0.2-2 m
Field of view	71.8° horizontal × 56.6° vertical
Distortion	<2.5%
Depth accuracy	≤1% or ≤1 cm

Illumination and performance

Parameter	Published specification
Frame rate	10-30 fps
Illumination	940 nm, 3 W
Input clock	27 MHz
Power consumption	340 mW typical

Electrical, interface and mechanics

Parameter	Published specification
Data interface	MIPI CSI-2, 2 lanes
Sensor supply	3.3 V single supply, ≥300 mA
VCSEL supply	4 V, ≥2 A
Module dimensions	21.00 × 9.50 × 6.33 mm

FAE note: The source lists 340 mW typical power consumption and separately specifies sensor and VCSEL supply requirements. Confirm the complete rail budget, peak current, sequencing, ripple and thermal behavior with the latest integration documentation before design release.

Integration Guidance

Host interface and optical stack

Confirm the host MIPI CSI-2 receiver, 2-lane routing, clocking and camera-driver support.
Validate the full optical stack, including cover window, field of view, internal reflections and enclosure vignetting.
Check depth calibration and repeatability with the final target range, reflectivity, motion profile and ambient-light environment.

Power and production validation

Design the 3.3 V sensor rail and 4 V VCSEL rail for the specified current capability.
Verify startup behavior, transient current, decoupling, heat dissipation and EMC in the complete device.
Confirm laser safety classification, regulatory requirements, operating temperature, output data format and supported software with DOMI for the final product configuration.

The published page does not specify host processor compatibility, supported SDK or operating systems, laser safety class, IP rating, operating-temperature range, calibration flow or ambient-light immunity. Request the latest datasheet and integration guidance for production qualification.

FAQs

Does DMOM2508CL provide 320 × 240 depth resolution?

Yes. DMOM2508CL is specified with 320 × 240 depth resolution and a global-shutter sensor.

What measurement range does DMOM2508CL support?

The published measurement range is 0.2-2 m. Final usable range depends on the optical stack, target reflectivity, ambient light and application conditions.

Does DMOM2508CL use a MIPI CSI-2 interface?

Yes. DMOM2508CL provides a 2-lane MIPI CSI-2 data interface. Confirm receiver compatibility, lane routing, timing and host-driver support on the target platform.

Is DMOM2508CL suitable for AR/VR hand tracking and gesture control?

Yes. AR/VR interaction, hand and finger tracking, and gesture control are listed application directions for DMOM2508CL. Validate tracking performance in the final user volume and lighting environment.

Does DMOM2508CL include 940 nm active illumination?

Yes. The published specification lists 940 nm, 3 W illumination for active depth sensing. The complete end product still requires laser-safety and compliance validation.

What frame rate does the DMOM2508CL ToF camera support?

DMOM2508CL is specified for 10-30 fps operation. The delivered system frame rate can depend on host bandwidth, depth-processing pipeline and configuration.

What power rails does DMOM2508CL require?

The sensor requires a 3.3 V single supply rated for at least 300 mA. The VCSEL rail is specified as 4 V rated for at least 2 A.

What are the dimensions and field of view of DMOM2508CL?

The module head measures 21.00 × 9.50 × 6.33 mm. Its specified field of view is 71.8° horizontal × 56.6° vertical.

Need help integrating DMOM2508CL?

Get expert guidance from our sensing engineers on product selection, evaluation samples, system integration, and technical requirements for your application.

Discuss Your Integration