DOMI DMOM2808D 320 × 240 ToF camera module with 850 nm VCSEL

Resolution 320 × 240

Range 0.25-4.5 m

Field of View 71.8° H × 56.5° V

DMOM2808D 320 × 240 MIPI CSI-2 ToF Camera Module

Compact 320 × 240 depth module with 850 nm VCSEL illumination, 0.25-4.5 m range and 2-lane MIPI CSI-2 output.

Key Highlights

320 × 240 global-shutter depth sensing
0.25-4.5 m specified measurement range
71.8° H × 56.5° V field of view
10-30 fps output over 2-lane MIPI CSI-2

Request a Quote Download Datasheet

Engineering support Datasheet available

Overview

The DOMI DMOM2808D is a compact 3D Time-of-Flight camera module that combines a 320 × 240 global-shutter sensor with 850 nm, 2 W VCSEL illumination. The datasheet specifies a 0.25-4.5 m measurement range, 10-30 fps frame rate and a 71.8° horizontal × 56.5° vertical field of view.

With a module head measuring 21.00 × 9.50 × 6.33 mm and a 2-lane MIPI CSI-2 output, DMOM2808D is designed for space-constrained embedded depth sensing. The interface also exposes SPI, I2C CCI, synchronization, reset and error signals through a 30-pin connector.

The stated depth accuracy is ≤1% / ≤1 cm and distortion is <2.5%. These are Rev 1.0 datasheet values without published test conditions. Confirm performance with the final optical stack, ambient light, target reflectivity, temperature and multi-camera environment before design release.

Resolution: 320 × 240
Range: 0.25-4.5 m
Field of View: 71.8° H × 56.5° V
Interface: MIPI CSI-2, 2 lanes

Applications

DMOM2808D is intended for embedded systems that need real-time depth information in a compact optical module.

Face sensing and spatial HMI

Face recognition and face motion tracking
Hand and finger tracking for gesture control

Robotics and manipulation

Visual support for robot grippers
Depth input for close-to-mid-range machine vision

3D reconstruction and AR/VR

3D reconstruction and spatial capture
Interaction with virtual objects in AR/VR systems

People and motion analytics

Localization, tracking and identification of people or animals
People counting and motion analysis

Technical Specifications

Parameter	Datasheet specification
Sensor	Global shutter
Resolution	320 × 240
Pixel size	15 µm
Sensor size	1/3 inch
Module dimensions	21.00 × 9.50 × 6.33 mm
Frame rate	10-30 fps
Measurement range	0.25-4.5 m
Field of view	71.8° horizontal × 56.5° vertical
Distortion	<2.5%
Illumination	850 nm, 2 W VCSEL
Input clock	27 MHz
Power supply	Sensor: 3.3 V single supply, ≥300 mA VCSEL: 4.6 V, ≥2 A
Power consumption	340 mW typical
Depth accuracy	≤1% / ≤1 cm
Data interface	MIPI CSI-2, 2 lanes

FAE note: Rev 1.0 does not state the distance, target reflectivity, ambient illumination or temperature used for the accuracy figure. Treat ≤1% / ≤1 cm as a datasheet headline specification and qualify it in the intended scene.

Mechanical and Connector Integration

Mechanical envelope

Module head: 21.00 × 9.50 × 6.33 mm
Lens field angle shown in the drawing: 58°
Keep the lens and diffuser apertures free of enclosure vignetting

Connector pair

Module connector: AXE630124
Mating connector: AXE530127
Confirm connector stack height, FPC bend radius and retention in the target enclosure

Validate before design freeze

MIPI CSI-2 electrical compatibility, lane mapping, timing and host driver support
3.3 V sensor and 4.6 V VCSEL rail sequencing, ripple, transient current and decoupling
Depth calibration after cover-glass, enclosure and optical-stack integration
Performance across ambient light, target reflectivity, motion and operating temperature
Multi-camera interference behavior when more than one active ToF module shares a scene
Laser safety classification and compliance for the complete end product

Rev 1.0 does not publish ambient-light immunity, operating temperature, ingress protection, laser safety class, output data format, calibration flow or supported host platforms. Request the latest integration documentation before production design.

FAQs

Does the DMOM2808D include 850 nm VCSEL illumination?

Yes. The module integrates an 850 nm, 2 W VCSEL illuminator with the ToF sensor for active depth sensing.

What resolution and frame rate does DMOM2808D support?

DMOM2808D provides 320 × 240 depth resolution with a specified frame-rate range of 10-30 fps.

What are the measurement range and field of view?

The datasheet specifies a 0.25-4.5 m measurement range and a 71.8° horizontal × 56.5° vertical field of view.

Does DMOM2808D support MIPI CSI-2 output?

Yes. It uses a 2-lane MIPI CSI-2 data interface and also exposes SPI, I2C CCI, synchronization, reset and error signals on its 30-pin connector.

Can DMOM2808D be used for gesture tracking and AR/VR?

Yes. The datasheet lists hand and finger tracking, gesture control, interaction with virtual objects and AR/VR among its typical applications.

Is DMOM2808D suitable for robotics and people counting?

Yes. Typical applications include visual support for robot grippers, localization and tracking, people counting and motion analysis. System performance still needs validation in the final scene.

What power supplies does the DMOM2808D require?

The sensor requires a 3.3 V single supply rated for at least 300 mA. The VCSEL rail requires 4.6 V rated for at least 2 A.

Which connector mates with the DMOM2808D module?

The module connector is AXE630124, and the mating connector specified in the datasheet is AXE530127.

Need help integrating DMOM2808D?

Get expert guidance from our sensing engineers on product selection, evaluation samples, system integration, and technical requirements for your application.

Discuss Your Integration Download Datasheet